Custom Printed Fridge Magnets

Technical Specifications for Custom Fridge Magnets

Artwork specifications:

When supplying artwork for Flexible Magnetic Vinyls, please supply 1 multi layered PDF, which contains the following:

• 3mm bleed on all sides

• 10mm safe zone

• CMYK PDF

• Outline or embed fonts

• 150 dpi resolution

• Artwork layer named “Artwork” with CMYK artwork for print

• We recommend using 18 pt fonts and 2 pt lines at a minimum on 150 dpi products to ensure the print is legible. Please have a look at our Help Centre articlefor more details.

• If you are ordering a custom shape, please supply a vector cutting guide with a thickness of 0.25pt set as a spot colour named “KissCutting” and set at 100% magenta. This should be setup as an overprint stroke on a layer named “KissCutting”

Printed direct to substrate on a 900µ (0.9mm) thick magnetic sheet comprising of a matt white PET (a form of polyester) to the front and a magnetic layer on the reverse.

Instruction for Magnets:

Before Use:

If your decal has arrived in a roll or appears creased, lay in a warm place on a flat surface for a few hours or overnight. A useful tip is to place on the warm side of a fridge or freezer.

Precautions for Use:

• Do not apply magnetic sheet to newly painted surfaces, especially non factory applied finishes.

Storage:

Magnetic decals are best kept by placing on a flat surface in a cool dry environment. Applying excessive heat can reduce the magnetic properties of the ...